U1414-87 Jeep Code — Meaning, Causes, Symptoms & Fix

The U1414-87 diagnostic trouble code is a high severity issue specifically indicating a missing message. In most Jeep models, this is primarily caused by a a module sending missing message. Because drivability is limited, you should address this promptly. Expected repair costs typically range from $100 to $1200. Your first diagnostic step should be to perform a full network scan to identify which modules are offline or reporting errors.When your Jeep’s Engine Control Module (ECM) detects an anomaly in the manufacturer specific network communication, it triggers the U1414-87 code. Specifically, the ECM continuously monitors the vehicle communication network for proper voltage and resistance. The module continuously monitors the network for expected messages. If messages are missing, invalid, or the bus drops offline, this code is set. In the context of Jeep vehicles, In Jeep vehicles, network codes often point to TIPM (Totally Integrated Power Module) issues, wiring harness chafing, or water intrusion in specific modules (like blind spot or sway bar disconnect). This means the can bus / control modules is no longer operating within factory specifications, compromising overall system efficiency.At its core, the U1414-87 code means the powertrain computer has seen data outside of its programmed parameters. The extension indicates a missing message. Specific failure condition: Missing Message detected. In real-world driving, Depending on the affected module, you may experience warning lights, loss of specific features (like cruise control or ABS), or a complete no-start condition. Ignoring this signal can lead to cascading failures in related emissions or engine timing components.,,,,,,,,,While the U1414-87 code can appear on any OBD-II vehicle, it is particularly prevalent in these Jeep models: Various Jeep Models (2007-Present, Gens: JK, JL, WK2, KL) – Network codes are universal across modern CAN-equipped Jeeps..